The Perma-Liner™ Sectional Point Repair System provides a structural repair without digging the existing pipeline or lining the entire pipeline. Pipeline video inspection has shown only 6% of the manhole to manhole sewer main needs repair. This equals 18 feet of a 300 foot sewer pipeline.
In the past 5 years there has been an increase in municipal and industrial collection system owners utilizing sectional point repairs in place of digging or lining the entire pipeline. This change has saved the municipal government agency hundreds of thousands of dollars and enabled them to repair multiple areas without additional funding.
Pipe made of Clay, Cast, PVC, Wood, etc… can now be structurally repaired in hours without disruption to traffic or sewer flow.
Perma-Liner™ Sectional Point Repair System are considered a structural repair per ASTM F-1216 for Cured-In-Place-Pipe (CIPP). The ASTM Specification testing requirements are based on a minimum life expectancy of 50 years. The Perma-Liner™ Sectional Point Repair testing results exceed these specifications!
Before
After
Perma-Liner™ manufactures the materials in a kit package. Our Certified Installers order the kits based on length and diameter of the section of pipe needing repaired. The Perma-Liner™ Sectional Point Repair kit includes PU inner liner, fiberglass/felt wrap around mat, two-part formulated resin, and all essential accessories to assist with completing the repair. Most Perma-Liner™ Certified Installers can install up to 3-6 per day with a three person crew.
The Perma-Liner Sectional Repairs can be installed in pipe diameters from 4 inches to 60 inches in diameter and lengths from 2 feet up to 30 feet. If the sectional point repair is positioned over a lateral junction , the junction can be re-opened with a specialized robotic cutter after the pipe is lined. Since every kit is manufactured to order, there is no mess or waste. The Perma-Liner™ Sectional Point Repair Kit provides installers consistency with every installation. Materials and formulations need to meet Specifications and your repair requirements. Perma-Liner™ has done the formulation, testing and is able to provide our customers a proven product…everytime!
Perma-Liner™ Sectional Point Repair Advantages
Formulated Epoxy Resins
Manufactured and Sold in Kit Packaging
Exceeds ASTM F1216 Specifications
Eliminate Root Intrusion
Bridge Missing Pipe Sections
Increase Flow Efficiency
Minimum Design Life 50 Years (Tested)
Technical Support / Marketing Support
Patented System
Only System with Inner Liner
No Digging
Seal Open Joints
2’ to 30 ’ Length Kits
6" to 54" Diameter Pipelines
Stop Infiltration / Ex-Filtration
Onsite Training Certification
The Point Repair forms a structural, permanent waterproof repair which seals all types of pipe against infiltration and exfiltration. The finished repair is stronger than the original pipe. This repair has a superior bond to the existing pipe equally in wet or dry conditions and because the resin is 100% solids, there is not shrinkage and therefore no annular space between the pipe and repair that could cause leakage.
FOR MORE INFORMATION OR TO SCHEDUAL YOUR NEXT COST SAVINGS REPAIR
Pipeline Inspection Services, Inc.
PO Box 3023
Nampa, ID 83653
Office: 208-465-3444
Cell: 208-941-9424 or 208-941-9421
Fax: 208-465-4413
